Hyster® W45ZHD walkie pallet trucks are designed and manufactured to be among the most dependable trucks in the industry today. Because every part is designed for strength, dependability and long wear, they’re also on the job more — exactly where you want your trucks and operators to be.
Chassis: 22.7 in.
Raised (Bumper): 59.5 in.
Lowered (Bumper): 62.7 in.
Raised (Handle): 60.8 in.
Lowered (Handle): 64.1 in.
Lowered: 56.1 in.
659 / 5,159 lbs.
Engine & Drivetrain
Lowered Height: 3.3 in.
Raised Height: 8.4 in.
Total: 5.1 in.
26.5 in. x 8.2 in. x open
Overall Width: 27 in.
Individual Fork Width: 7 in.
Load Wheel (Empty): 128 lbs.
Caster: (2) 3.25 x 1.5 in. spring loaded polyurethane
|46 in. heavy duty boxed forks|
|27 in. fork spread|
|Standard Construction – Operating Temperatures: +32° F to + 120° F|
|Press-on smooth rubber drive tire (10 x 4 in.)|
|Single polyurethane load wheels (3.25 x 4.5 in.)|
|Greaseable load wheel bearings|
|Engineered composite control handle|
|Direction reversing switch|
|8.1 x 25.8 in. battery compartment|
|24V AC Transistor Controlled Electrical System:|
|Sealed transistor traction controller|
|Vertically mounted AC traction motor|
|ADS (Auto Deceleration System) with regenerative braking|
|Heavy duty drive unit|
|Multi-function Display with Hour Meter:|
|Battery state of charge|
|Low battery lift interrupt|
|On-board Diagnostic and Self Test:|
|Program, test and diagnose|
|3 pre-programmed performance modes|
|2 operator selectable performance levels|
|Heavy duty lift pump and single hydraulic lift cylinder|
|Lift time-out at full lift height|
|Ramp hold with anti-rollback on grade|
|1-piece impact resistant power unit cover|
|Soft touch keyed ignition switch|
|Cowl-mounted power disconnect switch|
|IP65 sealed connectors|
|Electro-mechanical park brake|
|Turtle speed mode selection with handle in full upright position|
|Heavy duty Pallet Fork Design:|
|3.25 in. lowered / 5.12 in. lift height / 8.25 in. overall raised height|
|Heavy duty torsion bar linkage connection|
|Heavy duty, long life lift linkage with lubrication fittings|
|“X” groove style greaseable pivot bushings|
|Hardened, bolt retained flag linkage pins|
NOTE: Models with a price of "Request a Quote" are always included in a $0 search, regardless of actual value.