|
 |
Fore / aft stance operator controls |
|
|
36V battery (includes 350A Gray battery connector) |
|
|
91 / 203 / 52 in. � 3-stage full free lift mast (standard on N30ZDR, N35ZR and N40ZR) |
|
|
95 / 212 / 56 in. � 3-stage full free lift mast (standard on N35ZDR and N45ZR) |
|
|
Single reach mast (24 in. extend) with 33.5 in. wide class II hook type carriage (standard on N35-45ZR) |
|
|
Double reach (42 in. extend) with 33.5 in. wide class II hook type carriage (standard on N30-35ZDR) |
|
|
Integral sideshift with 7 in. travel (standard on N30-35ZDR) |
|
|
Forks: 1.6 x 3.9 x 42 in. (40 x 100 mm) � class II hook type (standard on N35ZR and N30-35ZDR) |
|
|
Forks: 1.8 x 3.9 x 42 in. (45 x 100 mm) � class II hook type (standard on N40ZR and N45ZR) |
|
|
5 x 3.9 in. poly articulating tandem load wheels � high load compound (standard on N35-45ZR) |
|
|
5 x 2.9 in. poly articulating tandem load wheels � high load compound (standard on N30-35ZDR) |
|
|
AC traction, lift / lower and steering |
|
|
Fully integrated CANbus controls |
|
|
Low step height |
|
|
Transistor controller with regenerative braking |
|
|
Power lowering |
|
|
Programmable traction speed and acceleration |
|
|
Electric power steering |
|
|
Polyurethane drive tire � 12 x 5.5 in. (standard on N30ZDR, N35ZR, and N40ZR) |
|
|
Polyurethane drive tire � 13.5 x 5.5 in. (standard on N35ZDR and N45ZR) |
|
|
Dual articulating polyurethane caster wheels |
|
|
Emergency power disconnect |
|
|
Battery discharge indicator with lift interrupt |
|
|
Key start |
|
|
36 in. high load backrest extension |
|
|
Sealed battery rollers |
|
|
Tilting Carriage (3� forward, 4� back) |
|
|
Padded operator compartment |
|
|
Rear post operator protection |
|
|
Operator�s overhead guard |
|
|
Low profile anti-fatigue floormat |
|
|
Operator�s display with alpha numeric messaging |
|
|
Multi-mode hour meter |
|
|
Control handle with simultaneous hydraulic functions |
|
|
Electronic horn |
|
|
Static discharge strap |
|
|
Operator�s manual |
|
|
UL classification E |
